FREE Programming Instructions for GM-PTK-PT04-A
You have 8 transponder chip keys programmed to a vehicle at one time.
Follow these instructions if you have at least one working key (USA made vehicles only):
- Take your new, uncut key(s) to a professional dealership or automotive locksmith to be cut to your vehicle.
- The vehicle should be off, enter the driver’s seat with all keys you wish to have programmed, including any previously working keys.
- Insert a previously working key into your ignition and turn it to ON/RUN.
- Now, turn your ignition to OFF/LOCK and remove the key from the ignition.
- Within 5 seconds, insert your new key into your ignition and turn it to ON/RUN and wait for the security light on the dash to turn off. Once it turns off the new key has been programmed.
- Repeat steps 3-5 for all new keys you wish to program.
- Test the new key(s).
Follow these instructions if you do not have any working keys (USA made vehicles only):
- Take your new, uncut key(s) to a professional dealership or automotive locksmith to be cut to your vehicle.
- The vehicle should be off, enter the driver’s seat with your new key.
- Insert your new key into your ignition.
- Turn your ignition to ON/RUN. On your dash, you will see the security light turn on.
- Wait about 10 minutes until you see the security light turn off.
- Turn your ignition to LOCK/OFF.
- Repeat steps 4-6 twice more, for a total of 3 times. Once you’ve complete these steps three times, turn your ignition to ON/RUN and the key will be programmed. (All previously working keys will be erased, and only this new key will work.)
- Test the new key.
- If you have additional keys you wish to program, continue by following the programming steps for if you have at least one working key.