Free Ford Programming Instructions 3 Button CWTWB1U311 FORD-RKE-331-3B

Dealership Price: 119.99
 Your Lowest Price: 11.95

Based on the Make, Model and Year of your vehicle, you may have different programming instructions.  We recommend double checking your owner's manual to confirm which instructions you need to follow.  

This list is what each vehicle's instructions most commonly are, but sometimes a vehicle may use different instructions than what is listed.  

It can be difficult to get the timing correct while programming this remote.  Read the instructions all the way through before beginning to make sure you fully understand each step and can perform it quickly enough.  If you're having trouble getting the vehicle to enter programming mode, try to vary the timing of the steps.

1999-2020 Ford Econoline

1999-2020 Ford E-150

1999-2020 Ford E-250

1999-2020 Ford E-350

1999-2020 Ford E-350 Super Duty

1999-2020 Ford E-450 Super Duty

2001-2008 Ford Escape

2000-2006 Ford Excursion

1998-2012 Ford Expedition

1998-2010 Ford Explorer

2001-2003 Ford Explorer Sport

1998-2014 Ford F-150

2002-2010 Ford F-250 Super Duty

2002-2010 Ford F-350 Super Duty

2002-2010 Ford F-450 Super Duty

2002-2010 Ford F-550 Super Duty

2004-2007 Ford Freestar

2005-2007 Ford Freestyle

1998-2012 Ford Ranger

1999-2004 Ford Windstar

2005-2008 Mercury Mariner

2004-2007 Mercury Monterey

1998-2001 Mercury Mountaineer

Programming Instructions for the above vehicles:

1. Enter the vehicle with all remotes you wish to have programmed to the vehicle, including any previously working remotes.

2. Close all of the doors and then press the unlock button on driver's door panel and insert your key into the ignition.

3. Turn the ignition from OFF to ON (Do not start the vehicle), 8 times within 10 seconds, with the 8th time ending in ON. The door locks will cycle to confirm that the vehicle has entered programming mode.

4. Within 20 seconds, take your new remote and press any button, the vehicle's door locks will cycle to confirm the remote has been programmed.

5. If you have additional remotes or previously working remotes, press any button on those remotes within 20 seconds of the previous remote.

6. Turn your ignition OFF. The vehicle's door locks will cycle to signify it has exited programming mode.

7.Test remotes.

2001-2010 Ford Explorer Sport Trac

2006-2014 Lincoln Mark LT

1998-2002 Lincoln Navigator

1999-2009 Mazda B-Series

Programming Instructions for the above vehicles:

1. Enter the vehicle with all remotes you wish to have programmed to the vehicle, including any previously working remotes.

2. Close all of the doors and then open the driver's door and leave it open. Press the unlock button on driver's door panel and insert your key into the ignition.

3. Turn the ignition from OFF to ON (Do not start the vehicle), 8 times within 10 seconds, with the 8th time ending in ON. The door locks will cycle to confirm that the vehicle has entered programming mode.

4. Within 20 seconds, take your new remote and press any button, the vehicle's door locks will cycle to confirm the remote has been programmed.

5. If you have additional remotes or previously working remotes, press any button on those remotes within 20 seconds of the previous remote.

6. Turn your ignition OFF. The vehicle's door locks will cycle to signify it has exited programming mode.

7. Test remotes.

1999-2002 Mercury Cougar

Programming Instructions for the above vehicle:

Programming instructions for the above vehicles:
1. Enter the vehicle with all remotes you wish to have programmed to the vehicle, including any previously working remotes.

2. Close all of the doors and then press the unlock button on driver's door panel and insert your key into the ignition.

3. Turn the ignition from OFF to ON (Do not start the vehicle), 4 times within 6 seconds.

4. Turn the ignition to OFF, the LED light on the clock will light up to confirm that the vehicle has entered programming mode.

4. Within 20 seconds, take your new remote and press any button, the LED will flash 4 times to confirm the remote has been programmed.

5. If you have additional remotes or previously working remotes, press any button on those remotes within 20 seconds of the previous remote.

6. Turn your ignition OFF, the LED light will turn off to signify the vehicle has exited programming mode.

7. Test remotes.